Home > Bsod On > BSOD On "cold" Boot - Stable Afterwards - Long-term Issue

BSOD On "cold" Boot - Stable Afterwards - Long-term Issue

So I have to leave my PC on and nothing happens when I click on the Windows pane. VG ^^ Did you try to disable Hybrid shutdown "Turn on fast startup " option as mentioned above? It's not a good sample and needs a System Agent Voltage of 1.14V to run memory at 3000MHz. or maybe something else? http://flvtomp4mac.com/bsod-on/bsod-on-cold-boot-please-help.php

It doesnt freeze on restart or shutdown. This guide is not for advanced overclockers.Key Terms and Settings Quick Guide:BCLK - Base Clock - This clock controls your memory speed, QPI speed, and core speed based on whatever multiples Please turn JavaScript back on and reload this page. If anybody from Microsoft is listening, get back to where you once belonged, because Macintosh is going strong.

I dont have all the drivers and everything up to date since i cant, but as is my computer is using 26% of my ram just doing my usual web browsing [email protected], 03:28 PMI haven't really started overclocking properly yet, I wanted to get a few benchmark results at 4ghz to get a clock-for-clock comparison with my previous i7 so i'm trying Tried using just my mouse and keyboard plugged in and the problem persisted.

Like Show 0 Likes(0) Actions Go to original post Actions More Like This Retrieving data ... Overclocking is similar to going and upgrade a car's engine by boring out its piston chambers and adding better fuel injection, air intake, transmission, etc..., but there is always a risk The reason i ask is because the ram in my old build got very very hot. sony wont ever see a dime from me again...

is there a way to know ram voltage directly in windows ? Restarting the machine without a BSOD does not produce a BSOD, the system is fine. Although it would be nice to add a seperate part on how to actually OC your kit to a frequency higher than your sticks are rated at. http://newwikipost.org/topic/ZhZC7MY5tWWA5GcvVs3qIElTEV1LVVPE/Prevent-Sound-Going-Into-quot-Standby-quot-D3-Cold.html Chino11-06-2014, 12:32 AMDDR4 is pretty scarce everywhere.

Monitor(s) Displays: HP h2207 with KVMS Screen Resolution: 1280x800 Hard Drives: 250GB Samsung EVO SATA-3 SSD; 2TB Seagate ST2000DM001 SATA-2; 1.5TB Seagate ST3150041AS SATA-2 Internet Speed: 6MB Up, 50MB Down Browser: increased dram voltage to 1.360 and system agent voltage is 1.168 and working so far. Should i be worried about something like that? So even if you don't have firewire you can still accidentally screw up your mobo. –OmnipotentEntity Jun 22 '12 at 20:59 I looked at the firewire port, and I

Vcore - Voltage of your cpu. http://www.tomshardware.com/forum/339421-31-reoccuring-problem-blue-screens-wont-repair-startup-freezes Is there a way to test the pcie x16 port?If i still have the time to test out the 590s in the old build before i pass out i will, otherwise dumocentvalny12-06-2014, 03:55 AMTesting 3000 @ 1.3V CL14-15-15-35 on R5E. Many times their Windows 8 computers restart themselves as soon as the login screen appears.

This basically gives the RAM enough voltage to pass the training and then lowers the voltage back down during OS use. navigate to this website If there is indeed a broken motherboard slot, then that could have caused problems that might be perceived as something a driver update might fix.- Edit - I would rather you Ideally you would try each stick in each slot which would be 16 separate tests with 4 sticks and 4 slots or 32 tests with 4 sticks and 8 slots.You can Then reseat your memory sticks making sure you push them all the way down into the slot until you hear the "click" sound.

Are you over clocking at all? It could be that the exceptions occur because it can't get the data it needs out of the RAM fast enough.At this point, you have three options:1) Download and run a It doesn't save my writing! More about the author Tuomas K.

benjamincakirMar 22, 2012, 2:55 AM Your HDD is seriously fragmented themadhattaMar 23, 2012, 5:37 AM Thanks for the info, as for the drivers i cant tell, i was already planning to themadhattaApr 11, 2012, 10:24 AM Oh really? Make sure no unnecessary items are enabled in startup: http://www.askvg.com/master-tutorial-to-make-your-windows-8-super-fast/ Jham Thanks a lot for this fix :) It works fine on me for my HP Pavillion!

This solved the issue for me.

Now all worries are gone and i can do wut eva i want ;) Kalorn11-05-2014, 08:27 PMGreat guide Chino, can we have this stickied? :) Counteragent7711-05-2014, 08:52 PMThanks for the top Please help VG ^^ Did you Reset or Refresh PC options? My Acer V3 laptop was bought in 2013, and now I have Windows 8.1, the latest and greatest version that cannot take on a task to Restart a laptop computer! How do you increase like that using offset?

zscorp11-27-2014, 06:32 AMu mean just change the profile and try with it? High voltages and high temps can cause decay and make the chip require more voltage for an overclock. As originally stated it appears you're having a problem with the RAM. click site Try those voltages until you find whats right for your chip.The C0/C1 is a much more difficult beast with a much larger range of 1.27 to around 1.4 and up to

Q. Thanks very much avg. All in all, a wasted rainy Sunday afternoon. Thanks to people like you that have the skills and know-how that give back to "The People" Hallelujah!

nikke06-23-2015, 07:03 PMEvening :) I tryed all things what you Elohim wrote but i didnt get system stable with 3000mhz memory speeds,not even stock... However, when entering BIOS>boot, I noticed that the "fast boot" option was still enabled there, as well as a few other things that involved booting. If you are on new Start Screen, type power and Windows will automatically search for the term and will show you the results. Basically unless the mouse is moving your not able to see 99% of the drop down menu.The other problem is with an external wifi usb drive ive been recommended by a

K.K GREAT!!! If this happens, you can just install with the upgrade CD on top of itself and it will always activate the second time (not installed to a blank drive anymore, there